rn 产品描述：
rn ★3M电气喷胶是一种柔和的蜡状物，包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀，可烘干，无氟氯化碳，无卤，使用方便，符合Mil-C-16173。
rn 产品规格
rn 15fl.oz/can
rn 应用范围
rn 电气喷胶用来防止金属部件被腐蚀，在适当的条件下可保持很长时间（室外至少1年）。主要用在电气和机械设备上，包括起重机、传动装置、磨具和其他大型的金属表面。
rn 警告：此产品易燃，不能使用在高能设备。
rn 物理性能
rn 颜色：黑色
rn 闪点：-104度（推进剂） -10度（溶剂）
rn 爆炸下限：1%（体积含量）
rn 爆炸上限：10.6%（体积含量）
rn 使用方法
rn 清理电气设备前，请先关闭设备，将电气喷胶喷嘴顶端靠近表面。在离表面8-10英寸时均匀喷涂产品，在通电前确保喷涂部位已经干燥。
rn 使用后喷雾烘干成一层蜡状薄膜。如果需要祛除喷胶，用石油馏分的溶剂即可。
rn 储存
rn 3M电气喷胶不需要堵上气罐的喷嘴或担心喷涂时会飞溅出来和滴下。将瓶罐垂直放置，在喷涂时将喷嘴推到最下面。在低于49度条件下保存，以保证最长的储存期
rnrn 3M™ Scotchkote™ Electrical Coating 技术资料（点击下载）
rnrn 3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）
rnrn 3M™ Scotchkote™ Electrical Coating FD 技术资料（点击下载）
rnrn 3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）
rnrn Cableand Wire Management （点击下载）
rnrn 3M™ Aerosols and Coatings（点击下载）
rnrn 
rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can
rnrn 3M ID 80611604135 UPC# 00051128601518 Part Number SCOTCHKOTE FD
rnrn 3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.
rnrn Specifications
rn| rn Applications | rnrn Resist moisture and corrosion | rn
| rn Can Size | rnrn 15 Fluid Ounce (US) | rn
| rn China RoHS - Below MCV | rnrn Yes | rn
| rn EU RoHS Compliant | rnrn Yes | rn
| rn Trademark | rnrn Scotch | rn
rn Features
rn- rn
- rn
rn Compatible with Scotch™ brand plastic electrical tapes
rn rn - rn
rn Fast Drying
rn rn - rn
rn Flexible when dry
rn rn - rn
rn Contains own applicator
rn rn - rn
rn No waste – provided can is resealed after use
rn rn
rn Applications
rn- rn
- rn
rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
rn rn - rn
rn Protect surfaces against moisture, corrosion and other contaminants
rn rn - rn
rn Improves the weather resistance and moisture resistance of the taped joint or joint
rn rn - rn
rn Suitable for direct burial, direct water immersion or above ground applications
rn rn - rn
rn Application Tip: After taping joints with Scotch™ vinyl plastic electrical tape, apply Scotchkote™ electrical coating evenly over joint, extending a short distance onto the cable insulation. Be sure the surface is clean, dry and free from oil or grease before electrical coating is applied
rn rn
rn Specifications
rn| rn Good Adhesion to: | rnrn rn Wood, Metal , Rubber and Plastic rn | rn
| rn Dielectric Strength | rnrn rn Dry: 450 volts/mil rn | rn
| rn Dielectric Strength | rnrn rn 24 hrs. in water: 200 volts/mil rn | rn
| rn Solvent | rnrn rn Methyl ethyl ketone, toluene rn | rn
rn Features and Benefits:
rn- rn
- rn Compatible with Scotch brand plastic electrical tapes rn
- rn Fast drying rn
- rn Flexible when dry rn
- rn Contains own applicator rn
- rn No waste - provided can is resealed after use rn
- rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil rn
- rn Protect surfaces against moisture, corrosion and other contaminants rn
- rn improves the weather resistance and moisture resistance of the taped joint or joint rn
- rn Suitable For Direct Burial, Direct Water Immersion Or Above Ground Applications rn
- rn 425g rn
rn Scotchkote™ Electrical Coating is a fast drying sealant and bonding agent recommended for joints wrapped with plastic electrical tape. Scotchkote provides vinyl tapes with an extra oil, moisture and corrosion-resistant layer of flexible coating for problem areas. The product is supplied in a 425g brush top can.
rnrn
rnrn 3M™ Scotchkote™ Electrical Coating
rnrn 
rn 
rn 3M™ Scotchkote™ Electrical Coating FD
rnrn 
rn 
rn 
rn 
rn 