rn 3M™ Scotch-Weld™ Epoxy Adhesive DP125 Translucent and Gray (PDF, 28.3KB)
rnrn Scotch-Weld ™ 125 B/A Part A Gray Epoxy Adhesive (US)
rnrn Scotch-Weld ™ 125 B/A Gray Epoxy Adhesive Part B (US)
rnrn
rnrn
rnrn
rn rn 3M™ Scotch-Weld™ Epoxy Adhesive 125 is a fast setting, very flexible, gray, two-part epoxy adhesive. 1:1 mix ratio, 25 minute work life and handling strength in approximately 2.5 hours. This product is the Accelerator (A) part for a B/A system.
rn - rn
- rn 25 minute worklife rn
- rn High peel and shear strength rn
- rn Medium viscosity rn
- rn General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace rn
- rn Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing. rn
rn
rnrn 3M™ Scotch-Weld™ Epoxy Adhesive 125 is medium viscosity that allows for easy pouring. Bonds to a variety of materials such as, metals, glass, ceramics, wood and many plastics.
rn rn rn rn
rn
rnrn Specifications
rnrn Adhesive Type | rnrn Epoxy | rn
rn Applications | rnrn Hard Disk Drive Component Assembly | rn
rn Brand | rnrn Scotch-Weld | rn
rn Color | rnrn Gray | rn
rn Consumer Label | rnrn No | rn
rn Container Volume | rnrn 5 Gallon | rn
rn Full Cure | rnrn 7 Days @ 72 F (22 C) | rn
rn Industries | rnrn Transportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods | rn
rn Mix Ratio Volume Base:Accelerator | rnrn 1 : 01 | rn
rn Peel Strength at 72 Degrees F (22 Degrees C) | rnrn 35 lb/in | rn
rn Physical Form | rnrn Flowable Liquid | rn
rn Product Form | rnrn Gallon | rn
rn Shear Strength at 72 Degrees F (22 Degrees C) | rnrn 4300 Pound-Force Per Square Inch | rn
rn Shelf Life in Months (from date of manufacture) | rnrn 24 | rn
rn Specific Gravity | rnrn 1.26 | rn
rn Storage Temperature | rnrn 72 Degree Fahrenheit | rn
rn Substrate 1 | rnrn Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber | rn
rn Substrate 2 | rnrn Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber | rn
rn Time to Handling Strength | rnrn 2.5 Hour | rn
rn Type | rnrn Epoxy Adhesive | rn
rn Viscosity Range (cps) at Room Temperature | rnrn 35,000-75,000 | rn
rn Worklife | rnrn 25 minutes @ 72 F (22 C) | rn
rn
rnrn
rn