3M Scotchcast Resin Joints 92-NBA Series
3M92NBA0-92NBA7,1KV冷缩中间灌胶接头技术资料（点击下载）
3M Scotchcast Resin Kits 92-NBA 0 up to 92-NBA 7（点击下载）
3M92NBA0-92NBA7,1KV冷缩中间灌胶接头技术资料（点击下载）
Scotchcast™ 92-NBA Connect Serie（点击下载）
3M92NBA0-92NBA7,1KV冷缩中间灌胶接头技术资料（点击下载）
3M Serie Resin Kits 92-NBA X und Seris 92-NBA XC（点击下载）
LV Resin Joints for Multi Core Non-Shielded Unarmoured Polymeric Insulated Cables up to 1.9kV / 3.3kV
Designed for Jointing Single Core up to 5 Core XLPE/PVC Low Voltage Cables
3M Scotchcast Resin Kit Series 92-NBA 0 up to 92-NBA 7 have been tested according to EN50393 Table 3 / I / A1
3M Scotchcast introduce these new 92-NBA Series Resin Joints to the market with the objective of providing time saving and improved safety benefits for cable jointers working with Resin Joint Systems on Low Voltage Cables. These Scotchcast Resin Cable Joints have been developed by 3M to offer ease and safety during installation of the resin joint. In addition the Scotchcast 92-NBA Series offers reduced jointing time and cost while at the same time maintaining the quality and dependability associated with 3M Scotchcast Resin Jointing Kits. The single mould body construction of the Scotchcast Standard Resin Joint features an innovative seal together with fastener clips. These unique features result in an easier installation method while removing the need for extra taping and lowering the possibility of resin leakage from the joint. There are foam seals at every finish in the resin joint mould body which are range taking so eliminate the need for sawing and taping, again removing a process and reducing installation time. The fully integrated resin delivery technique considerably reduces the chances of resin wastage, contact with skin and inhalation of any vapours.
3M Scotchcast Resin Joints 92-NBA Series Features
One part Scotchcast joint mould construction with Snap Fit Closure - Quick and easy installation
Transparent Scotchcast Joint Mould Body for easy control of connector distances in the joint.
Snap in 5-core spacer to ensure the distance between connectors in the joint.
3M Scotchcast 40G Resin for Specialist Applications in High Humidity Areas.
Scotchcast 40G Resin is supplied in transparent two chamber bags with integrated spout and Aluminium Guard Bag for protection against humidity.
The re-openable seal in the resin bag and integrated spout with a membrane provides a Closed Mixing and Pouring (CMP) system - Offering a Safer and cleaner installation for the jointer
Includes a closure cap to prevent any pollution
The Resin Joint includes a top seal & fixing clips - Reduced chance of resin leakage from the cable joint
Scotchcast 92-NBA Resin Joints feature pre cut range taking foam seals for all cable application diameters - eliminating the need for taping or sawing to complete the joint
Rated for LV Cable Jointing up to and including 1.9kV / 3.3kV
These Resin Joints are also suitable for Single Core Airfield Ground Lighting Cables rated to 6kV with the use of additional components
3M Scotchcast Resin Joint Kit 92-NBA Series Contents
Transparent Scotchcast Resin Joint Mould body with closure cap
3M Scotchcast 40G resin bag featuring the closed mix system for added health, safety and clean jointing process
Pre-cut foam sealing elements to save time
Snap in 5 Core Spacer
Abrasive Sponge
Detailed Cable Jointing Instructions
3M™ Scotchcast™ 40 Premium Resin
Features
Good adhesion on metals and different plastics.
Excellent hydrolytic stability
Available with Closed Mix and Pour Delivery System
Low exothermic reaction temperature.
Applications
Suitable for mechanical protection and electrical insulation of low voltage electrical joints installed for indoor and outdoor, underground and submerged applications
Specifications
| Type | Polyetheruretn |
| Form | Part |
| rn Densit) | 1.07 |
| Viscosity at 23°C (Pas) | 0.9 |
| Hardness (Shore D) | 57 |
| Elongation at break (%) | 50 |
| Pot life at 23°C (min) | 20 |
| Dielectric strength (kV/mm) | 24 |
| Exotherme Reaction (°C) - Temp 40°C | 95 |
Scotchcast™ 92-NBA Serie
Beschreibung
Die Premium Gießharz-Verbindungsgaitur ist zur dauerhaften Reparatur und zum Verbinden von kunststoffisolierten Kabeln bis 1kV geeignet. Der transparente Zweikammerbeutel des 2-Komponenten PU-Gießharz Nr. 40 enthält eine vorgegebene Menge an Harz- und Härteranteil, die sich schnell zum gebrauchsfertigen Gießharz vermischen lässt. Die Transparenz des Beutels ermöglicht die Sichtkontrolle während des Mischens.
Merkmale
Einteilige, transparente Verguss-Schale mit integrierten Schaieren
Optimiertes GMG-System (Geschlossenes Mischen und Gießen)
Vorgeformte, perforierte Schaumstoffabdichtungen
Zentraler Verguss-Stutzen
Transparenter Mischpackbeutel
Phasenabstandshalter
Umfangreiches Sortiment
ROHS- und REACH-Konform
Anwendungen
Elektroinstallation, in der Industrie und bei Energieversorgungsunteehmen.
r rn rn rn rn rn rn rn n r rn rn n rnr rn rn r rn rn rnr r rn rn rn rnrn n rn rn n rn rn rn rn n rn rn rn n r rn rn rn n rn rn rn rn rnn
| p-Nr. | Leerquerschnitt | Kabel-Ø | Außen-Ø | Länge Außenmaß |
|---|---|---|---|---|
| 92-NBA 0 | bis 4 x 4 bzw. 5 x 2,5 mm² | 4 - 16 mm | 32 mm | 148 mm |
| 92-NBA 1 | bis 4 x 10 bzw. 5 x 6 mm² | 10 - 22 mm | 36 mm | 178 mm |
| 92-NBA 2 | bis 4 x 16 bzw. 5 x 10 mm² | 12 - 25 mm | 38 mm | 230 mm |
| 92-NBA 3 | bis 4 x 25 bzw. 5 x 16 mm² | 13 - 32 mm | 55 mm | 270 mm |
| 92-NBA 4 | bis 4 x 50 bzw. 5 x 35 mm² | 18 - 36 mm | 63 mm | 319 mm |
| 92-NBA 5 | bis 4 x 95 bzw. 5 x 50 mm² | 19 - 45 mm | 76 mm | 369 mm |
| 92-NBA 6 | bis 4 x 120 mm² | 27 - 54 mm | 101 mm | 479 mm |
| 92-NBA 7 | bis 4 x 240 mm² | 29 - 64 mm | 130 mm | 643 mm |
