3M 2130 Scotchcast电缆修复胶

rn SEAZHENG Shanghai Co,. LTD is the industry is the collection research and development, the production, the service is a body’s enterprise group, the company locates is the LCM, LED light emitter diode, the FV solar cellmodule, the TP touchscreen, the electronic paper, circuit wafer PCB/FPC, the optical communication component,the RFID electronic tag, the smart card seal, the EL cold optical glass, the passive component, the seal test, theSMT surface pastes the attire, the camera, the handset assembly, the computer assembly, DVD, the digital product,the semiconductor chip, the sensor,the insulation, the automobile electron, profession and so on medical instrument high-end customers provides the conformity solution and the service. The company has 138 world 500 strong customers in the whole world.

rn In 2009 becomes the 3M dealer, acts the 3M electron electric power communication group comprehensively,the demonstration and the image group, the industry manufacture group, safety protection group, healthcare group,transportation group, new energy group’s each kind new, wonderful, special products, product including each kindof one-sided adhesive tape, two-sided adhesive tapes, adhesive, optics cellophane, fluorizating school property,fluorine resin material and so on.

rn In 2009, the company becomes TeamChem Company adhesive Mainland Area, develops the Chinese high-end electron adhesive market together.

rn SEAZHENG Shanghai CO,.LTD agent 3M 2130 Scotchcast  Flame Retardant Compound |Electrical Insulating Resin.

rn 3M Scotchcast 2130 Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resinthat is designed to replace the cable jacket when splicing or repairing mine and portable cables. Its unique formulation makes it particularly suited to withstand the rugged conditions under which mine and portable cables must operate. Scotchcast 2130 is also used as the insulating material for cable splices operating at 1000 volts or less and is rated for continuous use at 194ºF (90ºC) with an overload rating of 266ºF (130ºC).

rn 3M Scotchcast 2130 is packaged in the convenient 3M two-part Unipak bag. The contents of the Unipak bag are:

rn Size B:  7.6 oz (216 gms)    10.7 cu. in. (175,3 cu. cm.)

rn Size C:  21.7 oz (616 gms)   30.5 cu. in. (500 cu. cm.)

rn  • Flame retardant • Bonds to all modern cable jackets • Bonds to itself • Tough yet flexible • Unipak container for mixing and pouring • Excellent multipurpose moisture sealing resin

rn Applications: To replace or repair the jacket on both single and multi-core power cables and particularly where flexibility is required. To insulate between the conductors of multi-core splices operating at 1000volts or less. To seal the crotch or sheath when terminating multi-core cables.

rn Thoroughly clean and dry the surface of the substrate to which the material is desired to bond. In the case of  synthetic cable jackets, the resin must be poured immediately after the surface is prepared or a bond may not result. Remove the Unipak container from the envelope.

rn Premix the black side of the resin by squeezing to a smooth consistency before breaking the barrier. Firmly grasp each flat side of the bag near the center barrier and at the same time pull sides of the barrier apart and roll sides of thumbs through the barrier. Break the barrier all the way across to the side seals. Alternately squeeze each end of the bag forcing the resin back and forth. Strip the resin from the corners of the bag.

rn Mix until the color is completely uniform (30 to 40 squeezes). Clip off corner of the Unipak container and immediately pour into mold fill spout maintaining 1/2-inch head. When a mold is used it may be removed when the compound is no longer tacky or after one and a half hours at 73ºF (23ºC).