3M™ Scotchkote™ Electrical Coating FD

产品描述:★3M电气喷胶是一种柔和的蜡状物,包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀,可烘干,无氟氯化碳,无卤,使用方便,符合Mil-C-16173。产品规格15fl.oz/can应用范围电气喷胶用来防止金属部件被腐蚀,在适当的条件下可保持很长时间(室外至少1年)。主要用在电气和机械设备上,包括起重机、传动装置、磨具和其他大型的金属表面。警告:此产品

rn 产品描述:

rn

rn 3M电气喷胶是一种柔和的蜡状物,包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀,可烘干,无氟氯化碳,无卤,使用方便,符合Mil-C-16173

rn

rn 产品规格

rn

rn 15fl.oz/can

rn

rn 应用范围

rn

rn 电气喷胶用来防止金属部件被腐蚀,在适当的条件下可保持很长时间(室外至少1年)。主要用在电气和机械设备上,包括起重机、传动装置、磨具和其他大型的金属表面。

rn

rn 警告:此产品易燃,不能使用在高能设备。

rn

rn 物理性能

rn

rn 颜色:黑色

rn

rn 闪点:-104度(推进剂) -10度(溶剂)

rn

rn 爆炸下限:1%(体积含量)

rn

rn 爆炸上限:10.6%(体积含量)

rn

rn 使用方法

rn

rn 清理电气设备前,请先关闭设备,将电气喷胶喷嘴顶端靠近表面。在离表面8-10英寸时均匀喷涂产品,在通电前确保喷涂部位已经干燥。

rn

rn 使用后喷雾烘干成一层蜡状薄膜。如果需要祛除喷胶,用石油馏分的溶剂即可。

rn

rn 储存

rn

rn 3M电气喷胶不需要堵上气罐的喷嘴或担心喷涂时会飞溅出来和滴下。将瓶罐垂直放置,在喷涂时将喷嘴推到最下面。在低于49度条件下保存,以保证最长的储存期

rn

rn 图片关键词3M™ Scotchkote™ Electrical Coating  技术资料(点击下载)

rn

rn 图片关键词3M™ Scotchkote™ Electrical Coating FD MSDS技术资料(点击下载)

rn

rn 图片关键词3M™ Scotchkote™ Electrical Coating FD 技术资料(点击下载)

rn

rn 图片关键词3M™ Scotchkote™ Electrical Coating FD MSDS技术资料(点击下载)

rn

rn 图片关键词Cableand Wire Management (点击下载)

rn

rn 图片关键词3M™ Aerosols and Coatings(点击下载)

rn

rn  

rn
rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can
rn
rn 3M ID  80611604135    UPC#  00051128601518    Part Number  SCOTCHKOTE FD  
rn

rn 3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.

rnrn rn rn rn rn rn
rn
rn

rn Specifications

rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn
rn  Application Method‎rn ‎ Brush
rn  Applications‎rn ‎ Seal on vinyl tape applications which are subject to excessive amounts of oil.
rn  Brand‎rn ‎ 3M
rn  Can Size‎rn ‎ 15 Fluid Ounce (US)
rn  Container Volume‎rn ‎ 65
rn  Coverage Area‎rn ‎ Depends on the applicatiom
rn  Drinking Water Approvals‎rn ‎ Not approved for potable water applications
rn  Material‎rn ‎ Synthetic rubber & resin
rn  Product Form‎rn ‎ Liquid
rn  Product Type‎rn ‎ Can
rn  RoHS 2011/65/EU Compliant‎rn ‎ Yes
rn  RoHS EU Comments‎rn ‎ RoHS 2011/65/EU compliant without exemption 
rn *Important RoHS information
rn  Shelf Life‎rn ‎ 2 Year
rn  Storage Temperature‎rn ‎ 10 to 27 Degree Celsius, < 75 % RH
rn  Trademark‎rn ‎ Scotch
rn  Volume (metric)‎rn ‎ 426 ml
rn
rn
rn

rn 图片关键词

rn

rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can

rn

rn 3M ID  80611604135    UPC#  00051128601518    Part Number  SCOTCHKOTE FD

rn

rn 3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.

rn

rn Specifications

rnrn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn
rn Applicationsrn Resist moisture and corrosion
rn Can Sizern 15 Fluid Ounce (US)
rn China RoHS - Below MCVrn Yes
rn EU RoHS Compliantrn Yes
rn Trademarkrn Scotch
rn
rn

rn Features

rn
rn
rn
rn
    rn
  • rn

    rn Compatible with Scotch™ brand plastic electrical tapes

    rn
  • rn
  • rn

    rn Fast Drying

    rn
  • rn
  • rn

    rn Flexible when dry

    rn
  • rn
  • rn

    rn Contains own applicator

    rn
  • rn
  • rn

    rn No waste – provided can is resealed after use

    rn
  • rn
rn
rn
rn
rn

rn Applications

rn
rn
rn
rn
    rn
  • rn

    rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil

    rn
  • rn
  • rn

    rn Protect surfaces against moisture, corrosion and other contaminants

    rn
  • rn
  • rn

    rn Improves the weather resistance and moisture resistance of the taped joint or joint

    rn
  • rn
  • rn

    rn Suitable for direct burial, direct water immersion or above ground applications

    rn
  • rn
  • rn

    rn Application Tip: After taping joints with Scotch™ vinyl plastic electrical tape, apply Scotchkote™ electrical coating evenly over joint, extending a short distance onto the cable insulation. Be sure the surface is clean, dry and free from oil or grease before electrical coating is applied

    rn
  • rn
rn
rn

rn Specifications

rn
rn
rn
rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn
rn Good Adhesion to:rn

rn Wood, Metal , Rubber and Plastic

rn
rn Dielectric Strengthrn

rn Dry: 450 volts/mil

rn
rn Dielectric Strengthrn

rn 24 hrs. in water: 200 volts/mil

rn
rn Solventrn

rn Methyl ethyl ketone, toluene

rn
rn
rn
rn
rn
rn
rn
rn Features and Benefits:
rn
    rn
  • rn Compatible with Scotch brand plastic electrical tapes
  • rn
  • rn Fast drying
  • rn
  • rn Flexible when dry
  • rn
  • rn Contains own applicator
  • rn
  • rn No waste - provided can is resealed after use
  • rn
  • rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
  • rn
  • rn Protect surfaces against moisture, corrosion and other contaminants
  • rn
  • rn improves the weather resistance and moisture resistance of the taped joint or joint
  • rn
  • rn Suitable For Direct Burial, Direct Water Immersion Or Above Ground Applications
  • rn
  • rn 425g
  • rn
rn
rn

rn Scotchkote™ Electrical Coating is a fast drying sealant and bonding agent recommended for joints wrapped with plastic electrical tape. Scotchkote provides vinyl tapes with an extra oil, moisture and corrosion-resistant layer of flexible coating for problem areas. The product is supplied in a 425g brush top can.

rn

rn  

rn

rn 3M™ Scotchkote™ Electrical Coating

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 3M™ Scotchkote™ Electrical Coating FD

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词图片关键词

rn

rn 图片关键词图片关键词

rn

rn 图片关键词

rn
电话咨询
通信产品
电力产品
QQ客服