电机引线连接3M 5318 Motor Lead Pigtail Splice , 5-8 kV, Non-Shielded

3M™MotorLeadPigtailSplice5318,5-8kV,Non-Shielded,2AWG-250kcmil(feeder),2AWG-250kcmil(motorlead),1percaseEachkitmakesthreesplices.Lugsnotincludedinkits.Feederof1/0AWG-250kcmil(60-120sqmm),motorle

  • 产品类型: 矿用电缆类
rn
rn

rn 电机引线连接3M™ Motor Lead Pigtail Splice 5318, 5-8 kV, Non-Shielded, 2 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1 per case

rn

rn  

rn
rn  
rn
rn  
rn
rn
rn Each kit makes three splices. Lugs not included in kits. Feeder of 1/0 AWG-250 kcmil (60-120 sq mm), motor lead 2 AWG-250 kcmil (35-120 sq mm).
rn
rn 图片关键词
rn rn rn rn rn
rn
rn  
rn
rn Medium Voltage Leads, 5–8 kV
rn
rn
rn 3M™ Motor Lead Pigtail Splice Kits, Non-Shielded Pigtail, 5316-5319
rn
rn 3M™ Motor Lead Pigtail Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail
rn
rn (stub) connections at 1000 volts or less, as well as 5/8 kV non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM
rn
rn rubber. A mastic strip is used for the moisture seal.
rn
rn These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a
rn
rn pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make
rn
rn three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be
rn
rn used.
rn
rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn
rn
rn
rn  
rn
电话咨询
通信产品
电力产品
QQ客服