rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can

rn 3M ID 80611604135 UPC# 00051128601518 Part Number SCOTCHKOTE FD

rn 3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.

rn Specifications

rnrn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn

rn Applications‎	rn Resist moisture and corrosion‎
rn Can Size‎	rn 15 Fluid Ounce (US)‎
rn RoHS 2011/65/EU Compliant‎	rn Yes‎
rn RoHS EU Comments‎	rn RoHS 2011/65/EU compliant without exemption rn *Important RoHS information‎
rn Trademark‎	rn Scotch‎

rn “RoHS Compliant” means that the product or part ("Product") does not contain any of the substances in

rn excess of the maximum concentration values (“MCVs”) in EU Directive 2002/95/EC, as amended by

rn Commission Decision 2005/618/EC, and/or in the recast RoHS Directive 2011/65/EU, Annex II, unless

rn the substance is in an application that is exempt under the RoHS Directive 2002/95/EC, as amended,

rn and/or under Annex III or Annex IV to the recast RoHS Directive 2011/65/EU. The MCVs are by weight in

rn homogeneous materials. This information represents 3M's knowledge and belief, which may be based in

rn whole or in part on information provided by third party suppliers to 3M.

rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can

rn 3M ID 80611604135 UPC# 00051128601518 Part Number SCOTCHKOTE FD

rn rn rn rn rn rn rn

rn Specifications

rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn

rn Application Method‎	rn ‎ Brush
rn Applications‎	rn ‎ Seal on vinyl tape applications which are subject to excessive amounts of oil.
rn Brand‎	rn ‎ 3M
rn Can Size‎	rn ‎ 15 Fluid Ounce (US)
rn Container Volume‎	rn ‎ 65
rn Coverage Area‎	rn ‎ Depends on the applicatiom
rn Drinking Water Approvals‎	rn ‎ Not approved for potable water applications
rn Material‎	rn ‎ Synthetic rubber & resin
rn Product Form‎	rn ‎ Liquid
rn Product Type‎	rn ‎ Can
rn RoHS 2011/65/EU Compliant‎	rn ‎ Yes
rn RoHS EU Comments‎	rn ‎ RoHS 2011/65/EU compliant without exemption rn *Important RoHS information
rn Shelf Life‎	rn ‎ 2 Year
rn Storage Temperature‎	rn ‎ 10 to 27 Degree Celsius, < 75 % RH
rn Trademark‎	rn ‎ Scotch
rn Volume (metric)‎	rn ‎ 426 ml rn

rn 产品描述：

rn ★3M电气喷胶是一种柔和的蜡状物，包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀，可烘干，无氟氯化碳，无卤，使用方便，符合Mil-C-16173。

rn 产品规格

rn 15fl.oz/can

rn 应用范围

rn 电气喷胶用来防止金属部件被腐蚀，在适当的条件下可保持很长时间（室外至少1年）。主要用在电气和机械设备上，包括起重机、传动装置、磨具和其他大型的金属表面。

rn 警告：此产品易燃，不能使用在高能设备。

rn 物理性能

rn 颜色：黑色

rn 闪点：-104度（推进剂） -10度（溶剂）

rn 爆炸下限：1%（体积含量）

rn 爆炸上限：10.6%（体积含量）

rn 使用方法

rn 清理电气设备前，请先关闭设备，将电气喷胶喷嘴顶端靠近表面。在离表面8-10英寸时均匀喷涂产品，在通电前确保喷涂部位已经干燥。

rn 使用后喷雾烘干成一层蜡状薄膜。如果需要祛除喷胶，用石油馏分的溶剂即可。

rn 储存

rn 3M电气喷胶不需要堵上气罐的喷嘴或担心喷涂时会飞溅出来和滴下。将瓶罐垂直放置，在喷涂时将喷嘴推到最下面。在低于49度条件下保存，以保证最长的储存期

rn 3M™ Scotchkote™ Electrical Coating 技术资料（点击下载）

rn 3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）

rn 3M™ Scotchkote™ Electrical Coating FD 技术资料（点击下载）

rn 3M™ Scotchkote™ Electrical Coating FD MSDS技术资料（点击下载）

rn Cableand Wire Management （点击下载）

rn 3M™ Aerosols and Coatings （点击下载）

rn 图片关键词

rn 3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can

rn 3M ID 80611604135 UPC# 00051128601518 Part Number SCOTCHKOTE FD

rn Specifications

rnrn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn

rn Applications	rn Resist moisture and corrosion
rn Can Size	rn 15 Fluid Ounce (US)
rn China RoHS - Below MCV	rn Yes
rn EU RoHS Compliant	rn Yes
rn Trademark	rn Scotch

rn Features

rn
rn Compatible with Scotch™ brand plastic electrical tapes
rn
rn
rn Fast Drying
rn
rn
rn Flexible when dry
rn
rn
rn Contains own applicator
rn
rn
rn No waste – provided can is resealed after use
rn

rn Applications

rn
rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
rn
rn
rn Protect surfaces against moisture, corrosion and other contaminants
rn
rn
rn Improves the weather resistance and moisture resistance of the taped joint or joint
rn
rn
rn Suitable for direct burial, direct water immersion or above ground applications
rn
rn
rn Application Tip: After taping joints with Scotch™ vinyl plastic electrical tape, apply Scotchkote™ electrical coating evenly over joint, extending a short distance onto the cable insulation. Be sure the surface is clean, dry and free from oil or grease before electrical coating is applied
rn

rn Specifications

rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn

rn Good Adhesion to:	rn rn Wood, Metal , Rubber and Plastic rn
rn Dielectric Strength	rn rn Dry: 450 volts/mil rn
rn Dielectric Strength	rn rn 24 hrs. in water: 200 volts/mil rn
rn Solvent	rn rn Methyl ethyl ketone, toluene rn

rn Features and Benefits:

rn Compatible with Scotch brand plastic electrical tapes
rn Fast drying
rn Flexible when dry
rn Contains own applicator
rn No waste - provided can is resealed after use
rn Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
rn Protect surfaces against moisture, corrosion and other contaminants
rn improves the weather resistance and moisture resistance of the taped joint or joint
rn Suitable For Direct Burial, Direct Water Immersion Or Above Ground Applications
rn 425g

rn Scotchkote™ Electrical Coating is a fast drying sealant and bonding agent recommended for joints wrapped with plastic electrical tape. Scotchkote provides vinyl tapes with an extra oil, moisture and corrosion-resistant layer of flexible coating for problem areas. The product is supplied in a 425g brush top can.

rn 3M™ Scotchkote™ Electrical Coating

rn 图片关键词