rn
rn 3M™ Motor Lead Pigtail or V-Stub Splice 5384, 5-8 kV, Shielded and Non-Shielded, 250-500 kcmil (feeder), 4/0 AWG-500 kcmil (motor lead), 1 per case
rn
rn
rn
rn
rn
rn
rn
rn
rn 3M ID 80611425424 UPC# 00051128559543 Part Number 5384
rn
rn
rn - rn Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
rn - rn Perfect for use with shielded and non-shielded cables
rn - rn 0.3 to 0.51-in O.D. insulation
rn - rn Accommodates wire size of 10 to 4 AWG
rn - rn Rated for 5/8 kV applications
rn - rn The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
rn - rn Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
rn - rn Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)
rn - rn RoHS 2011/65/EU Compliant
rn - rn 1 kit/case
rn
rn
rn 3M™ 5380 Series Motor Lead Pigtail Splice Kit includes 3 lug covers, 3 cold shrink terminations, 12 mastic sealing strips, 3 copper tape strips, 3 constant force springs, 3 cleaning kits and more. The lug or splice cover is used as a slip-on insulator and made of EPDM rubber to resist punctures as well as abrasion damage. The mastic provides protection against moisture on the pigtail kits. It is perfect for splicing motor lead connections for polyethylene cable, cross-linked polyethylene cable, ethylene propylene rubber cable and copper conductors. RoHS 2011/65/EU Compliant.
rn
rn
rn
rn Specifications
rn
rn
rn
rn
rn
rn
rn rn rn | rn Brand | rn rn 3M | rn
rn rn | rn Connection Type | rn rn Pigtail (Non-Shielded) | rn
rn rn | rn Range Feeder Cable (AWG & kcmil) | rn rn 8-4 | rn
rn rn | rn Range Motor Lead (AWG & kcmil) | rn rn 10-4 | rn
rn rn | rn RoHS 2011/65/EU Compliant | rn rn Yes | rn
rn rn | rn RoHS EU Comments | rn rn RoHS 2011/65/EU compliant without exemption
rn *Important RoHS information | rn
rn rn | rn Trademark | rn rn 3M | rn
rn rn | rn Voltage | rn rn 5/8 kV | rn
rn rn
rn
rn
rn
rn
rn
rn Catalog
rn
rn
rn
rn
rn Data Sheet
rn
rn
rn
rn
rn Flyer
rn
rn
rn
rn
rn Instructions_Manual
rn
rn
rn
rn
rn SDS
rn
rn
rn
rn
rn 
rn
rn
rn
rn
rn
rn 
rn
rn 
rn
rn
rn
rn Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn
rn Medium Voltage Leads, 5–8 kV
rn
rn
rn 3M™ Motor Lead Pigtail Splice Kits, Non-Shielded Pigtail, 5316-5319
rn
rn 3M™ Motor Lead Pigtail Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail
rn
rn (stub) connections at 1000 volts or less, as well as 5/8 kV non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM
rn
rn rubber. A mastic strip is used for the moisture seal.
rn
rn These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a
rn
rn pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make
rn
rn three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be
rn
rn used.
rn
rn
rn 
rn
rn
rn
rn
rn
rn 
rn
rn 
rn
rn 
rn
rn 
rn
rn 
rn
rn 
rn
rn 
rn
rn 
rn
rn
rn
rn
rn
Motor Lead Pigtail Splice 5316-5319 - Instructions/Manual (PDF 577.7 K)（点击下载）