3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

3M™MotorLeadPigtailorV-StubSplice5382,5-8kV,ShieldedandNon-Shielded,2-1/0AWG(feeder),4-1/0AWG(motorlead),1percase3MID80611425408UPC#00051128559529PartNumber5382电机引线连接3M™MotorLeadPigtailSpl

  • 产品类型: 矿用电缆类
rn

rn 3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

rn

rn  

rn
rn  
rn
rn
rn 3M ID  80611425408    UPC#  00051128559529    Part Number  5382    
rn
rn

rn  

rn

rn  

rn

rn 电机引线连接3M™ Motor Lead Pigtail Splice 5317, 5-8 kV, Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

rn

rn 3M™ 5380 Series Motor Lead Pigtail Splice Kit is designed for splicing motor lead cables to incoming feeder cables. This kit makes use of high dielectric-constant stress-control termination for feeder cables to reduce the size and electrical stress. It is rated for 5/8 kV-rated applications. The kit accommodates shielded and non-shielded cables.

rn

rn  

rn
rn
rn
    rn
  • rn Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • rn
  • rn Perfect for use with shielded and non-shielded cables
  • rn
  • rn 0.3 to 0.51-in O.D. insulation
  • rn
  • rn Accommodates wire size of 10 to 4 AWG
  • rn
  • rn Rated for 5/8 kV applications
  • rn
  • rn The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
  • rn
  • rn Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
  • rn
  • rn Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)
  • rn
  • rn RoHS 2011/65/EU Compliant
  • rn
  • rn 1 kit/case
  • rn
rn
rn 3M™ 5380 Series Motor Lead Pigtail Splice Kit includes 3 lug covers, 3 cold shrink terminations, 12 mastic sealing strips, 3 copper tape strips, 3 constant force springs, 3 cleaning kits and more. The lug or splice cover is used as a slip-on insulator and made of EPDM rubber to resist punctures as well as abrasion damage. The mastic provides protection against moisture on the pigtail kits. It is perfect for splicing motor lead connections for polyethylene cable, cross-linked polyethylene cable, ethylene propylene rubber cable and copper conductors. RoHS 2011/65/EU Compliant.
rn
rn
rn

rn Specifications

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn rn
rn  Brand‎rn ‎ 3M
rn  Connection Type‎rn ‎ Pigtail (Non-Shielded)
rn  Range Feeder Cable (AWG & kcmil)‎rn ‎ 8-4
rn  Range Motor Lead (AWG & kcmil)‎rn ‎ 10-4
rn  RoHS 2011/65/EU Compliant‎rn ‎ Yes
rn  RoHS EU Comments‎rn ‎ RoHS 2011/65/EU compliant without exemption 
rn *Important RoHS information
rn  Trademark‎rn ‎ 3M
rn  Voltage‎rn ‎ 5/8 kV
rn
rn
rn rn
rn
rn
rn
rn

rn Catalog

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn
rn rn
rn
rn
rn
rn

rn Data Sheet

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn
rn
rn
rn rn
rn
rn
rn
rn
rn
rn

rn Flyer

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn
rn
rn
rn
rn rn
rn
rn
rn
rn
rn
rn
rn

rn Instructions_Manual

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn
rn
rn rn
rn
rn
rn
rn
rn

rn SDS

rn

rn  

rn
rn
rn
rn rn rn rn rn rn rn
rn rn
rn
rn
rn
rn

rn 图片关键词

rn

rn  

rn
rn
rn

rn 图片关键词

rn

rn 图片关键词

rn
rn
rn

rn Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).

rn

rn  

rn rn

rn 图片关键词 Motor Lead Pigtail Splice 5316-5319 - Instructions/Manual (PDF 577.7 K)(点击下载)

rn

rn  

rn rn
rn  
rn
rn Medium Voltage Leads, 5–8 kV
rn
rn
rn 3M™ Motor Lead Pigtail Splice Kits, Non-Shielded Pigtail, 5316-5319
rn
rn 3M™ Motor Lead Pigtail Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail
rn
rn (stub) connections at 1000 volts or less, as well as 5/8 kV non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM
rn
rn rubber. A mastic strip is used for the moisture seal.
rn
rn These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a
rn
rn pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make
rn
rn three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be
rn
rn used.
rn
rn

rn 图片关键词

rn

rn  

rn
rn
rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn

rn 图片关键词

rn
rn
rn
rn  
rn
rn

rn  

rn
电话咨询
通信产品
电力产品
QQ客服